Retrato de Naturo creado por IA y usado hueforge para poder imprimir en 3d
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Jayo Negro Transmission Distance: 0.3
PLA Overture Light Gray Transmission Distance: 0.7
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 6
Swap Instructions:
Start with Negro
At layer #6 (0.56mm) swap to Light Gray
At layer #14 (1.2mm) swap to Yellow
At layer #16 (1.36mm) swap to Jade White for the rest.