Ever felt a pang of envy scrolling through Instagram? Witnessing memes that capture the moment, long-lost friends in far-flung places, aspirations that stir the soul, adventures you'd embark on with youth on your side, or luxuries you'd indulge in with wealth in your pocket. And there, among it all, the seal of approval from Alpine Formula 1's very own Pierre Gasly on every post but yours.

Wonder no more about how he finds the time to sprinkle his likes so generously across the digital realm—yet somehow, miss your gallery. With this 3D-printed marvel, you can bring Pierre Gasly's legendary 'likes' into your home, attaching his endorsement directly to your cherished Polaroids!

Directions For Printing/Magnets:

• Printer Used: Bambu P1P with AMS- best result is with AMS, but can be color swapped as well.
• Material: All showcased models are crafted with Polymaker Matte filament.
• Settings: A 10% infill is all you need, paired with the default 0.2mm layer height. I highly suggest using the Arachne Wall Generator for the best finish, especially for the unbolded lettering.
• Magnet locations: I have 3 magnet pockets in the file, spaced evenly on the sides and in the middle. You don’t have to use all of these pockets, but it will be a stronger and easier hold for the Polaroids on the fridge. At minimum I would suggest using two (one on each side, no middle) for the most stability.
• Embedding the Magnets: I embedded the magnets by pausing at layer 11 (your slicer may vary), and if you have a magnetic bed, just make sure the magnet is in-line or slightly below the plastic, no glue required!
• Color Swap Option: I printed it with the lettering facing up, and because the lettering is above the backing plate, you can do a layer swap to do a multi-color print as long as you are okay with the heart being the same color as the text.
• These are the magnets I used and designed the part for: https://a.co/d/aEskNjZ