Print in Place Convertible
Copyright Claim
Print in Place Convertible
Boost
16
20
1
Print Profile(1)
![[70% Scale, Slight Brim]: 0.16mm layer, 3 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US892d45f1ade329/57074750/instance/2024-03-08_0a078f0e861b6.jpg?x-oss-process=image/resize,w_100/format,webp)
[70% Scale, Slight Brim]: 0.16mm layer, 3 walls, 10% infill
1.8 h
1 plate
Boost
16
20
1
1
41
27
Released
Description
This is Print-in-Place design was designed to be printable on any FDM printer. Thanks to the use of bridges and 45° overhangs, this model shouldn't be too challenging. The design was heavily influenced by the 1958 Chevy Impala.
The length is roughly 140mm, but when turned 45°, it should fit even onto a 12x12cm buildplate.
Happy printing!
Caution: Sharp Edges - Not suitable for children under 9 years due to breakable plastic. Adult supervision required.
Comment & Rating (1)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld