Mega Man
Print Profile(1)
Description
Free for personal printing use only.
Exclusive projects and commercial license available at Patreon.com/StrataPrints — your support keeps new designs coming! Check out the Zero Profile print below, available EXCLUSIVELY on Patreon!
Project: megaman face.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 188.05x235mm in size
You may print at higher layer heights below the Base Thickness of 1.28mm
The Max allowed Thickness is 3.44mm and the Actual Thickness is 3.44mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#e4bd68 PLA BambuLab Basic Gold Transmission Distance: 3
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
#ff5869 PLA BambuLab Basic Pink Transmission Distance: 8
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #18 (1.52mm) swap to Blue
At layer #22 (1.84mm) swap to Cyan
At layer #30 (2.48mm) swap to Pumpkin Orange
At layer #31 (2.56mm) swap to Gold
At layer #33 (2.72mm) swap to Ivory White
At layer #34 (2.8mm) swap to Pink
At layer #36 (2.96mm) swap to Cyan
At layer #38 (3.12mm) swap to Ivory White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)