Naruto Kunai by WF3Dprinting

WF3Dprinting

Props & Cosplays>Other Props & Cosplays

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

PLA 0.20mm

1.2 h

1 plate

4.9(37)

[Mini-Friendly]:0.16mm layer, 3 walls, 10% infill

2.5 h

1 plate

4.9(10)

Open in Bambu Studio

Boost

122

190

413

426

Released

Description

Print all pieces, assembly - Done ;D

Comment & Rating (54)

@savagedad

failed on me twice on the A1. I’ll keep trying because it looks like a great model!

The designer has replied

@WF3Dprinting

Would recommend adding a brim and supports on the handle because of the fast bed movements! there is a slight overhang in the ring, which works fine on corexy machines but the bad slingers might tip the prints over! :)

@vietfarmer21

i try printing another kunai design but it the same problem.. i think my printer just cant handle how thin the tip is n the movement knock it over

@LamesHunter

Print Profile

PLA 0.20mm

great quality overall top of circle could be fixed by adaptive layer

@user_1285407287

failed a couple of times but turned out good

@whity

Print Profile

PLA 0.20mm

Nice Kunai! Struggled a bit, but came out nicely in the second try.

@bitflung

Print Profile

PLA 0.20mm

I printed a pair of these for my 10yo son - he loves Naruto and was designing something similar in tinkercad before he found this model. it's a great model. gluing together required a small rotational pressure to make a strong bond between the peg and handle/knife, which was nice and easy to build once we decided to add that twist while the glue was drying. the point is pointier than i expected! perhaps i should have modified before giving to a young kid...