Hello hope you like it
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Yellow Transmission Distance: 10
Swap Instructions:
Start with Black
At layer #5 (0.56mm) swap to Red
At layer #13 (1.2mm) swap to Orange
At layer #16 (1.44mm) swap to Yellow for the rest.