This is a simple and convenient frame for displaying your favorite TCG cards. It fits standard US cards such as Pokemon and Magic the Gathering (MTG). The cards should be stored in a toploader (such as ultra pro), and can quickly slot in and out from the top.

The front and back of the frame snap together, and then the frame fits snuggly in the base. Note that the frames will be tight, start from the top and work down. You may need to flex back piece a bit to get the assembly together.

There is an optionally removable shim in the bottom of the front frame. This is in case you are using a toploader with a larger bottom edge. You can bend the shim towards the opening to loosen and remove it.

Please also check out my terastallized version of the frame, with 3D embossed design! https://makerworld.com/en/models/388591#profileId-289424