Desiccant Spool Container by V3 Precision

V3 Precision

3D Printer>3D Printer Accessories

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

20% cooling fan, 0.2mm layer, 8 walls, 9% infill

Designer

5.7 h

1 plate

Open in Bambu Studio

Boost

Released

Description

This desiccant container can hold many desiccant packs and is shaped like a filament spool for an easy fit in a filament dryer. The desiccant packs can be reconditioned in the dryer. Perfect if you have a dual spool filament dryer.

There are two versions of this design. One has vent holes modeled in Fusion 360 and printed as is.

The other was modeled solid or blank sides. I used the honeycomb infill pattern on the sides. See the attached video for details.

I would recommend printing with ASA (or similar) due to the heat it will be exposed to in a dryer.

Filament: ASA (or equivalent due to heat)
Standard speed and settings (from Bambu Lab Studio)
Adjust cooling fan for 10 to 20% max to keep ASA from warping.
No support needed

See the attached video if you want to use a hex pattern or or other pattern used in support.

Comment & Rating (2)

@Jude653

what do I do with this? no second half. I wasted good filament 😨

@djdfire

so... none of the models that are pictured is what you print, also it's only 1 of the 2 peices needed with no links to the other models, dont bother printing off the app as you'll need to search far and wide for the other peices .. 1/5.. do better

(Edited)

No more