Rotary Dice!

Rotary Dice!

Boost
4
10
0
GIF

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

A1 Mini - Rotary Dice 5x2mm Magnet Project
A1 Mini - Rotary Dice 5x2mm Magnet Project
Designer
2.9 h
2 plates

Open in Bambu Studio
Boost
4
10
0
0
4
2
Released

Description

The Rotary Dice!!

This is the rotary dice to replace boardgame D-6 dice! It uses magnets for feedback and to key in the position of the faces. It is a great fidget too!

 

I am currently working on a few model iterations that use different size magnets for different levels of feedback! I will post those here. I will also be creating multiple bases so that multiple of these rotary dice can be connected together.

 

Assembly Instructions:

  1. Insert the bearing into the rotary wheel (part 1) until it is flush against the wall
  2. Use super glue to install the magnets into the 7 holes. Remember to make sure the magnets on the wheel all face the same direction. The magnet on the base (part 2) should attract the magnets on the wheel.
  3. Slide the rotary wheel (part 1) onto the shaft of the base (part 2) with the magnets facing the magnet in the base.
  4. Place part 3 into place and run a few test spins
  5. If no adjustments on the fit are needed, add a tiny dab of super glue to the edge of the bearing to tack it in place on the rotary wheel.
  6. Add some super glue to the inside hole of part 3 and a very small amount on the inside edge of the groove.
  7. Connect parts 2 and 3 and hold for a minute for the glue to dry
  8. You're done!

 

Filament Used:

 

ZIRO Matte Multicolors PLA Filament FOR Rotary Wheel (Part 1):

ZIRO PLA Filament Matte, Multicolors 3D Printer Filament, Tri-Colors 3-in-1 Chrome Coextrusion, Magic Three-Color PLA, Fit Most FDM 3D Printers,1KG/2.2lb Spool, Rosy Cloud (Matte) : Amazon.ca: Industrial & Scientific

 

And

 

Polymaker Polyterra Matte Grey PLA FOR The Base (Parts 2 and 3):

Polymaker Matte PLA Filament 1.75mm Gray, 1.75 PLA 3D Printer Filament 1kg - PolyTerra 1.75 PLA Filament Matte Grey 3D Printing Filament : Amazon.ca: Industrial & Scientific

 

Non-3D Printed Parts:

  • 1 x frictionless 22mm OD x 8mm ID x 7mm bearing
  • 7 x 5mm by 2mm magnets

TRIXES 16 Frictionless ABEC 9 Skateboard Roller Skate Bearings : Amazon.ca: Sports & Outdoors

 

200 MEALOS Mini Magnets - 100pcs 3X1mm, 50pcs 4x2mm, 50pcs 5x2mm Neodymium Magnets Rare Earth Magnets - Tiny Thin Magnets for Miniatures Small Model Hobby Crafts - Small Round Little Magnets Assorted : Amazon.ca: Home

 

I hope you enjoy it!

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more