Multi Colour Ear Gauge or widener - Poke Ball
Initial object is 20mm for scaling purposes
Object is face up on plate to easily see colour changes (at object level colours can be chosen)
Flip face down if you want the textured finish
If you want to change the size of the gauge then scale according to the table below (feel free so go as high as you want)
DO NOT SCALE THE Z AXIS!!!!!! JUST X & Y
SIZE X & Y SCALE
26mm X=130% Y=130%
24mm X=120% Y=120%
22mm X=110% Y=110%
20mm X=100% Y=100%
18mm X=90% Y=90%
16mm X=80% Y=80%
14mm X=70% Y=70%
12mm X=60% Y=60%
10mm X=50% Y=50%
8mm X=40% Y=40%
6mm X=30% Y=30%
Smaller you go detail in finer items will be lost a bit - tested down to 8mm just fine
Printed in PLA