Print Profile(2)
0.2mm layer, 2 walls, 15% infill
1.1 h
1 plate
A1 Mini, 0.24mm layer
55 min
1 plate
Open in Bambu Studio
Boost
14
23
6
0
105
50
Released
Description
I designed a plate stand off a picture I saw online. It prints in two parts that perfectly fit together, no glue needed.
I am planning to upload a thinner version with less protruding ends in front of the plate/picture.
Have fun :-)
Comment & Rating (6)
All
After multiple attempts at printing this I found the model parts start at different heights. The left part starts on layer 1, the right half starts on layer 3 so you need to split the model before slicing and printing it.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
gut
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
when it downloads, 1 half is not on the plate. have to separate the 2 parts from eachother in order to move the second part onto the plate or it tries to print in mid-air.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Other Issues:one part was above the bed and had to have support under it.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld