Ams Bowden Guide Clip by iretreiver

iretreiver

3D Printer>3D Printer Parts

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

updated_loose_fit_0.2mm layer, 3 walls, 25% infill HighTemp Plate

Designer

22 min

1 plate

4.9(62)

Original_tight_fit_0.2mm layer, 3 walls, 25% infill_hightemp_plate

Designer

21 min

1 plate

4.8(4)

0.2mm layer, 3 walls, 20% infill

24 min

1 plate

5.0(12)

Boost

152

106

374

296

Released

Description

I was having issues with filament not wanting to go through the ams hub in the back of my printer so I modeled this clip to keep the bowden tube aligned straight. I have had zero issues since I installed.

RECOMMENDED: download tight fit / original

Comment & Rating (106)

@LucynaKushinada

Print Profile

updated_loose_fit_0.2mm layer, 3 walls, 25% infill HighTemp Plate

after review: the Model has a little Problem: TG He inner Hook IS a little to big. P.S. NOW it works - Thnx for the Update

(Edited)

The designer has replied

@iretreiver

if you slide it on it should fit perfect

@LucynaKushinada

Replying to @iretreiver :

tryed everthing. IT wont fit. i removed the inner Part that i marked an IT worked.

(Edited)

@pmflav

Replying to @LucynaKushinada :

Fits perfectly, you may need to calibrate your printer. Manually.

(Edited)

@ThisPatrik3D

Print Profile

0.2mm layer, 3 walls, 20% infill

good quality Profile. This Thing is Useful now i have fewer Problems with the AMS.

The designer has replied

@PAPAEmeritusIV

i had issues with my ams getting stuck on retracting slot 3 and 4 only. this helped and when I moved it off the top and to the right side I have had zero issues

@PeterH.

Print Profile

Original_tight_fit_0.2mm layer, 3 walls, 25% infill_hightemp_plate

Fits well and works great

@make3D

Print Profile

updated_loose_fit_0.2mm layer, 3 walls, 25% infill HighTemp Plate

prints fine

@Elessar3141

Print Profile

updated_loose_fit_0.2mm layer, 3 walls, 25% infill HighTemp Plate

hat super geklappt

@ralf.see

löste das Problem bei mir das das Filament davor hängen bleibt

@tractorsrred

Printed great on high temp plate.

@RichWoman420

Print Profile

updated_loose_fit_0.2mm layer, 3 walls, 25% infill HighTemp Plate

good!

@Regoric

Print Profile

updated_loose_fit_0.2mm layer, 3 walls, 25% infill HighTemp Plate

@alexgp0906

Print Profile

0.25mm

I was having feeding issues at tool head. there are other options for that, I know. but I found out that my tool head feeding issues came only because of the Bowden getting blocked. this wonderful little devil.gox my problem and since then no more errors. thanks a lot sir

The designer has replied

@iretreiver

glad it sorted out your issues, thanks for downloading and rating.