"Ever since the XP-38 came out, they just aren't in demand."

3D print your own Star Wars Luke's Landspeeder made from 3:1 scale replica of popular toy bricks.

Printing Guide

It is recommended to use the print profile I have provided to print this model. I can't guarantee that you will achieve the same success I have, but after several test prints and trial and error, I know this to work. I also recommend printing on a smooth surface PEI plate so your pieces are not textured.

Filament

The print profile is separated by color on each plate. You can use whatever filament you have on hand, but I used:

• Paramount 3D PLA (Skin - Universal Beige) for Tan
• Paramount 3D PLA (Military Khaki) for Dark Tan
• Hatchbox PLA Iron Red for the Dark Red
• Bambu Lab Gray PLA Basic for the Light Gray
• Sunlu Gray PLA for the Dark Gray
• Bambu Lab Gold PLA Basic
• eSun PLA+ White
• Bambu Lab PETG Transparent

Print Settings

The print profile is set up to print two wall loops and 10% infill on Cubic, however you can tweak to your liking. I did set the two Dark Red Modified 1 x 1 plates to 20% because one broke when I was assembling the kit.

Supports

Again, I recommend the settings I have in the Print Profile. Most parts can be printed without supports, as the Bambu bridges the pieces very well, but the ones that need them are already set up to be supported and also easily removable.

Assembly

Look at the diagram below to assemble. Pretty simple. Some parts fit great some are tight and some are loose, but overall it holds together.

Want to print more? See my profile for othe iconic 3:1 scale replica Star Wars Brick built vehicles!

That about covers it, I think… Happy printing and building!