Match Box

The Match Box is a more robust and sturdy version of your typical red heads cardboard match box, featuring slide locks for both open and closed positions and a dedicated striker holder on both sides of the box to fit the original strikers into.

Update - 11/7/2026: Larger 0.4mm tolerance print profile released for those struggling with printer tolerance issues.

Key Features

Slide Locks - Hold the tray in both the closed and open position to prevent unintentional opening or spillage of matches.

Striker Holders - A dedicated place to insert the original strikers of the match box and still retain their intended function.

Robust & Sturdy Design - Holds up to more of a beating than your standard cardboard matchbox.

Assembly

1. Slot the tray into the body (Note: You may need to press each of the slide lock pins inwards once to free them up after printing).
2. Insert the matches into the tray, then close the tray.
3. Cut the striker strips off of the original match box (Note: Trim them so that Length < 54mm & width = 10.5mm).
4. Slide the trimmed striker strips into the striker holders on both sides of the match box.
5. Assembly Complete