Update 3/31/2024: This design has been updated to version 2.0, however since folks have made the v1.0 models, and may need spare parts, I am leaving this here.  If you want the latest version 2.0 models, you can find them at the links below:

NEW VERSION 2.0 MODLES CAN BE FOUND AT THE LINKS BELOW:

1x2, 1x3, 1x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0

2x2, 2x3, 2x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0

3x3, 3x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0

This is a Gridfinity 4x2 (6U) Lidded Bin with Latch.  It can hold whatever stuff will fit in a volume of approx 161x78x30.8mm. 

Due to the lid design, this will not work well if stacking 1x1 bins, on it, but works fine with 1x2 bins or larger.

This design requires the following hardware:

• (2) M3x6mm Button Head Cap Screws (BHCS) - or any M3x6 button head screws.

There is a 3MF included which is sliced using Bambu Studio with a 0.4mm X1 Carbon profile. The profile is for two single color plates (with slot 1 being white and slot 2 being gray if using an AMS). The profile uses Arachne wall generator and 15% gyroid infill. I also used adaptive layers (smooth) for the base.  I suggest using PETG for the lit at least, since it has an integrated spring.  PLA will work too, but PETG should be more durable.

Assembly tips can be found in “Step 6” at the link below:

https://www.mystoopidstuff.com/bambu-spares-box-build-guide.html

Other stuff:

If you need some bins for small parts, the following bins with covers are a good option to use with the Box For Stuff 20 bin and 25 bin cases (or other 6U tall cases):

1. 1 compartment 2x1 (6U) bin with a magnet pickup tool
2. 1x1, 1x2 (3 Compartment) and 1x4 (6Compartment) bins with lids (6U) - version 2.1
3. 1x2, 1x3, 1x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0
4. 2x2, 2x3, 2x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0
5. 3x3, 3x4 (6U and 12U) Lidded Bin for Stuff with Latch Version 2.0

If you want to check out my other Gridfinity cases, you can find them at the links below:

1. Gridfinity Box For Stuff 20 bin (6U)
2. Gridfinity Box For Stuff 25 bin (6U) (max size for a Bambu X1C/P1S)
3. Gridfinity Box For Stuff 16 bin (6U) (Ender 3 size)
4. Gridfinity Box For Stuff 16 bin - 12U deep version (Ender 3 size)
5. Gridfinity Box For Stuff 2 bin (6U) (small test version)

If you want to store some small hardware and need some good labeled bins, Ch3vr0n posted some segmented bins for the Gridfinity system here:

https://www.printables.com/model/732655-gridfinity-boxes-for-gridfinity-box-for-stuff-20-b

Update 3/8/2024: I found a minor issue with a gap in the model which was fixed.  The file Lidded_Large_Bin-1R-4x2_BASE.stl was updated with the change.  I did not see a problem with the old file when sliced, but since it was a problem I fixed it anyway.  I also uploaded a STEP model for the latest version (1R).  I have also completed models for a 2x2 and 3x2 version of this lidded box, which will be uploaded soon (once they are tested).

If you find these models useful, please post a like or a comment with some pics of your prints.

You can find the other things I'm working on at my blog here. You can also follow me here or on Printables, to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!