This one turned out really good with the simple color scheme it already had. Enjoy!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Default White Transmission Distance: 5
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #17 (1.44mm) swap to Orange
At layer #20 (1.68mm) swap to Yellow
At layer #23 (1.92mm) swap to White for the rest.