Many24

cover

2023-09-27_x9ft75vixozn.jpg

plate_1.png

Tridense

DSC01178.webp

plate_1.webp

1 set, 0.2mm layer, 2 walls, 15% infill

<p>This is a very simple garden gate latch, easy to print, easy to install.</p><p>To assembly it, you will just need hardware mentioned below.</p><p>I recommend using locking glue to secure the bolt and nut over time, and to grease the “bearing”:</p><figure class="image image_resized" style="width: 60.46%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000023583/design/2023-09-27_46tktzbpyw75.jpg"></figure><h3><strong>Print instructions</strong></h3><ul><li>Print in PETG or any other outdoor suitable material</li><li>No supports needed</li><li>Print with 4+ perimeters</li></ul><h3> </h3><h3><strong>Additional hardware needed</strong></h3><ul><li>1x M4x18 bolt</li><li>1x M4 nut</li><li>3x screws</li></ul><p><strong>Optional</strong></p><ul><li>Locking glue</li><li>Grease</li></ul><figure class="image image_resized image-style-align-center" style="width: 60.86%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000023583/design/2023-09-27_oirqvh6k38cd.jpg"></figure><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like this model, please leave a boost. Thank you</boostcontent></boostme><p><br> </p>

Gate latch

ASIA

Print Profile(1)

Description

Print instructions

Additional hardware needed

Comment & Rating (111)

License

Related Models