Print Profile(5)
0.2mm layer, 5 walls, 8% infill
Designer
1.8 h
1 plate
0.2mm layer, 2 walls, 10% infill (PLA)
2.7 h
2 plates
All printers, 0.2mm layer, 5 walls, 8% infill
1.9 h
2 plates
0.2mm layer, 2 walls, 10% infill (PETG)
3.1 h
2 plates
Click to see more
Open in Bambu Studio
Boost
112
156
42
7
464
286
Released
Description
Simple laptop stand designed to fit on bed 18x18cm. You can scale it up for any bed size. I use it with Huawei Matebook 14.
There are 2 models for different laptop thickness.
For laptop like Matebook 14 (16mm thickness) use 20mm version:
For laptop with thickness greater than 20mm, use 30mm version:
Tips:
Height of the stand when printing is 20mm, which is good compromise between print time and stand stability. In case you want to have more stability, just adjust Z dimension of the model in your slicer.
It is also recommended to use some tape / rubber pads on the bottom of the stand to prevent sliding.
Print instructions
- I used PLA, but any material will do
- No supports needed
- 3 perimeters are enough, but 4+ perimeters for added stiffness
- 0 top and bottom layers
- 10% honeycomb infill
- 3MF and gcode with above setting included
Comment & Rating (42)
All
Print Profile
All printers, 0.2mm layer, 5 walls, 8% infill
It falls a lot, and it doesn’t understand the Mac 💻 I think they don’t recommend it recommended
The designer has replied
0
Reply
You provided a solid black photo. Did you scale the stand as the description tells you is required? It wasn't designed specifically for the Mac, again, as the description explains. However, you can see that other people have successfully printed it for use with MacBooks without any issues. I recommend you read the description and try again.
Also, you are reviewing if the PRINT PROFILE successfully printed the model you chose to print. Did it print successfully? If so, that is what you are meant to be rating as the rating system explains.
0
Reply
Print Profile
All printers, 0.2mm layer, 5 walls, 8% infill
very nice
0
Reply
Sehr schöne Notebookständer DANKE
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill (PLA)
Cool design and work's fine
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill (PLA)
the images show hexagon shapes, the file prints flat sides.
Other Issues:not as pictured.
The designer has replied
0
Reply
This print profile specifically shows flat sides. There are other print profiles for the open sides.
(Edited)2
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill (PLA)
both profiles are doing a good job
1
Reply
Boosted
Perfect for just trowing this into my bag when I go out somewhere
0
Reply
Boosted
Print Profile
All printers, 0.2mm layer, 5 walls, 8% infill
laptop kept sliding off as mine is rounded on the bottom front corner. otherwise great print.
0
Reply
Print Profile
All printers, 0.2mm layer, 5 walls, 8% infill
Funcional, aunque le falta algo de estabilidad dependiendo del ordenador.
0
Reply
Print Profile
0.2mm layer, 5 walls, 8% infill
we use this to prop up a wood crate for fidgets in our shop. love it
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld