Batch Bad - Wrecker Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #11 (0.96mm) swap to Gray
At layer #17 (1.44mm) swap to White for the rest.