MutualGarden

cover

plate_1.png

plate_2.png

plate_3.png

SuzieQueued

IMG_4028.jpg

IMG_4023.jpg

IMG_4024.jpg

IMG_4025.jpg

IMG_4026.jpg

IMG_4027.jpg

IMG_4030.jpg

I printed everything with 100% infill, using Inland PETG Purple for plates and locking fastener, Inland PLA Silk Silver for wheels, NAGA TPU Green for tires. I printed the hubcabs (in PLA silk silver also), but decided against using them because mine were going to be very snug and difficult to remove if the bolt ever needed to be loosened, etc. Had some difficult getting one part of the top plate to print smoothly - you can see the rough patch in the final photo - but the underside was smooth for functional purposes, so I left the top rouch patch alone as it did not impede function.&nbsp;Two assembly notes:<ol><li>The Ender 3 pulley wheels are the source for the bearings, and each pulley wheel has 2 bearings inside, so you only need 4 pulley wheels to dissemble to obtain 8 bearings.</li><li>One bearing goes on the inside of the wheel, the other on the outside, then the bolt is inserted into the wheel from the outside and passes through both bearings, and then I used one of the pulley washers between the wheel and the dolley plate to keep it from rubbing and impeding the wheel movement. I really couldn't see this process on the designer's video for myself, so I hope this description helps others!</li></ol>

0.18mm layer, 2 walls, 100% infill

Watch on YouTube: <figure class="media"><div data-oembed-url="https://youtu.be/tEpB4USFycY"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/tEpB4USFycY" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;In addition to the pressure parts, you will need: 4X bolt M5x25 (the axle can be further adjusted with pliers) M5x20 is also sufficient) 4x M5 lock nut <a target="_blank" href="https://www.amazon.de/Redrex-Printer-Plastic-Bearing-Tarantula/dp/B07Q5WN3GK/ref=b2b_gw_d_puwl_sccl_4/258-3878976-9519614?pd_rd_w=ZN77V&content-id=amzn1.sym.2debee2b-d77b-4f91-bbd1-09412b30af4e&pf_rd_p=2debee2b-d77b-4f91-bbd1-09412b30af4e&pf_rd_r=SKS9V7BD5HRXG8X2Z72G&pd_rd_wg=UwGbv&pd_rd_r=e531023d-fd8c-4db8-a516-784391aae90e&pd_rd_i=B07Q5WN3GK&psc=1" rel="nofollow noopener">8x ball bearings</a> (best way to order rollers or take old ones, from your Ender 3 right away) <a target="_blank" href="https://www.amazon.de/Homeet-Kugelkopf-Stativkopf-Durchmesser-Gewindeloch/dp/B09Q5J6TWZ/ref=b2b_gw_d_puwl_sccl_2/258-3878976-9519614?pd_rd_w=ZN77V&content-id=amzn1.sym.2debee2b-d77b-4f91-bbd1-09412b30af4e&pf_rd_p=2debee2b-d77b-4f91-bbd1-09412b30af4e&pf_rd_r=SKS9V7BD5HRXG8X2Z72G&pd_rd_wg=UwGbv&pd_rd_r=e531023d-fd8c-4db8-a516-784391aae90e&pd_rd_i=B09Q5J6TWZ&psc=1" rel="nofollow noopener">Camera Ball head </a> <a target="_blank" href="https://www.amazon.de/Gewindeschraube-Zollschrauben-Stativgewinde-Schrauben-Stativkopf/dp/B09V78WZJG/ref=b2b_gw_d_puwl_sccl_1/258-3878976-9519614?pd_rd_w=ZN77V&content-id=amzn1.sym.2debee2b-d77b-4f91-bbd1-09412b30af4e&pf_rd_p=2debee2b-d77b-4f91-bbd1-09412b30af4e&pf_rd_r=SKS9V7BD5HRXG8X2Z72G&pd_rd_wg=UwGbv&pd_rd_r=e531023d-fd8c-4db8-a516-784391aae90e&pd_rd_i=B09V78WZJG&psc=1" rel="nofollow noopener">Adapter screw </a>  Printing Support on! Carrier (the blue) and tires in 0.2  Rims and hub caps are printed in 0.16.  If you want it: Fuzzy Skin 0.2/0.1 (distance/thickness)

Camera Dolley

ASIA

Print Profile(1)

Description

Comment & Rating (3)

License

Related Models