I created this mount so that I could have my camera's stand at a high place but still look down since if you put it on a cabinet the bottom of the view is reached very quickly and you can't look all the way down.

This way the camera is mounted upside-down and can rotate freely and look everywhere in your house.

You can either use the screw mounts or use the magnet holes in the base to drop two 29x19x4mm magnets in there (or smaller ofc) and set it up on a metal cabinet. Both are shown in my pictures! The black one uses magnets, the white one is screwed in place.

The print profile works perfectly, drop in 2 M3 nuts and screw parts together with M3 bolts.