This is a Stream Deck Rig Mount with two additional armatures and a rotating magnetic base. I added a horizontal and vertical armature that lets you move the arm up and down and the Stream Deck right and left. The magnetic base mounts to a desk and hold the unit in place but still allows it to rotate and be removed as needed.

The mounting plates for the Stream Deck and the face plate use M3 screws so you will need to cut threads for those as they are not in the stl files.

The flat plate mounts on the desk with screws and uses 5 neodynium magnets available from Amazon at this link.

https://www.amazon.com/gp/product/B0772PFC89/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

With these magnets the Stream Deck stays in place when I hit the buttons, but still rotates if I need to move it aside.

The face plate and the mounting plates use M3 screws, so you need to cut threads. The magnetic base just uses appropriately sized wood screws to mount.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Yes

Supports:

Resolution:

.4

Infill:

Filament:Cheap PLA Black