Summary:

A timeless meme turned into a magnet. No MMU/AMS needed for multiple colors, simply pause on layers to change filament.

Print settings:

PLA, 0.4 nozzle, 0.2 layers, 2 walls, 10% gyroid infill, classic wall

Magnets:

Designed for four 6x3 magnets. My magnets actual measurement was 6.0mmx2.5mm so the magnet hole is 6.3x2.7. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print.

Filament changes:

Color order for filament changes: white, blue, grey, black.

If you stick with 0.2 layer heights:

• Layer 17 insert magnets
• Layer 22 change from white to blue
• Layer 24 change from blue to grey
• Layer 26 change from grey to black

*Be sure to double check your slicer for layer pauses