Slaughter to prevail / Alex Terrible Mask
Copyright Claim
Slaughter to prevail / Alex Terrible Mask
Boost
135
150
6
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
20.8 h
2 plates
Open in Bambu Studio
Boost
135
150
6
6
190
11
Released
Description
This is my attempt at recreating the masks worn by the band Slaughter to Prevail, Its not perfect but its close enough to get the point across and seems to be one of the better versions out of what I can find online especially for free.
Jaw hinge and pins use m3x12 screws and m3 nuts feel free to use whatever you want for that if those pins don't suit your needs.
Comment & Rating (6)
All
This is really cool and printed very well.
0
Reply
any tips to print the Mask. specially where the horns are? i'm using PLA+ but print fails where the horns are on the plate. Using outer brimming also did not solve this issue. Using P1S
The designer has replied
0
Reply
Which file are you printing and in what orientation? I usually print the upper half of the mask in 2 parts otherwise If your printer is big enough I'd suggest tilting it at a 45 teeth side down and using tree supports
0
Reply
Dude what !!! So sick! As Alex would say, you have a balls!!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld