Statue of Liberty preparing a latte in a coffee shop.
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA SPARKLE BambuLab Slate Gray Sparkle Transmission Distance: 1
PLA BambuLab Matte Ash Gray Transmission Distance: 8
PLA BambuLab Matte Desert Tan Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 2
Swap Instructions:
Start with Slate Gray Sparkle
At layer #6 (1.32mm) swap to Ash Gray
At layer #10 (2.12mm) swap to Desert Tan
At layer #13 (2.72mm) swap to Jade White for the rest.
If you want to resize the print, DO NOT change the Z axis.
Happy printing, and share your make!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.