Bone Dragon (Filament Painting) - HueForge
Copyright Claim
Bone Dragon (Filament Painting) - HueForge
Boost
186
245
25
Print Profile(5)
Original 4 color AMS, 3 filament changes, almost no waste/poop, 0.04mm layer, 1 walls, 100% infill
Designer
6.7 h
1 plate
4 Colors AMS, 0.08mm layer, 3 walls, 100% infill
5 h
1 plate
0.04mm layer, 1 walls, 100% infill
5.9 h
1 plate
3 Colors AMS, 0.08mm layer, 3 walls, 100% infill
4.8 h
1 plate
Click to see more
Open in Bambu Studio
Boost
186
245
25
1
489
87
Released
Description
Bone Dragon (Filament Painting) - HueForge
Printing instructions:
Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.
Use Original HueForge profile to get the intended look, my models are very sensitive to print settings because of color blending between layers.
Every setting and filament changes for AMS are carefully prepared and fine-tuned in the Original HueForge print profile, feel free to change colors, but I recommend not to adjust other settings.
If you want to experiment with your own settings or non-original print profiles, for best look print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm.
You can use same filaments as I did, or you can experiment with your own.
Don't forget to upload a make!
Filaments Used:
- PLA BambuLab Basic Black Transmission Distance: 0.6
- PLA BambuLab Basic Blue Gray Transmission Distance: 3
- PLA BambuLab Basic Beige Transmission Distance: 8
- PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
- Start with Black
- At layer #5 (0.4mm) swap to Blue Gray
- At layer #15 (0.8mm) swap to Beige
- At layer #34 (1.56mm) swap to Jade White for the rest.
Comment & Rating (25)
All
Print Profile
Original 4 color AMS, 3 filament changes, almost no waste/poop, 0.04mm layer, 1 walls, 100% infill
Super rausgekommen
The designer has replied
1
Reply
Great print!
0
Reply
Print Profile
Original 4 color AMS, 3 filament changes, almost no waste/poop, 0.04mm layer, 1 walls, 100% infill
Love this, it was good enough for me to hang with my designs on my office wall. Great work!
1
Reply
nice. Thanks for sharing it
0
Reply
Print Profile
Original 4 color AMS, 3 filament changes, almost no waste/poop, 0.04mm layer, 1 walls, 100% infill
nice detailed print but for me the profile caused lots of little blobs of filament more or less all over the print. Not an issue I’ve had before or since with HueForge models. it cleaned up very well but was time consuming to correct
1
Reply
Print Profile
3 Colors AMS, 0.08mm layer, 3 walls, 100% infill
very nice
0
Reply
Print Profile
0.04mm layer, 1 walls, 100% infill
I printed it and it came out awesome
0
Reply
Print Profile
Original 4 color AMS, 3 filament changes, almost no waste/poop, 0.04mm layer, 1 walls, 100% infill
Awesome... nice job thanks
0
Reply
Print Profile
Original 4 color AMS, 3 filament changes, almost no waste/poop, 0.04mm layer, 1 walls, 100% infill
worked really well looks fantastic
0
Reply
The print profile is no longer public
1
Reply
Print Profile
4 Colors AMS, 0.08mm layer, 3 walls, 100% infill
1
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld