Gimbal protector for Radiomaster TX16S (MKI or MKII) / Jumper T16 radio (should work, not tested). Protector is from a one piece with a grip for easier removing. LED charging indicator is fully visible while the protection is on. Bigger diameter of holes for gimbals sticks offers wide compatibility.

Printing:

• PLA/PETG (recommended)
• 0,15 mm layer “Quality settings) with 0,40 mm nozzle size
• 30-40% infill (40% recommended), gyroid type
• 3 Perimeters
• Avoid Crossing Perimeters ON (to help prevent stringing)
• Support Settings:
  • Generate Support Material ON
  • Auto Generated Supports ON
  • Overhang Threshold 35 Degrees
  • Style SNUG
  • Top Contact Z Distance 0.15mm
  • Pattern Spacing 3mm
  • Support on Build Plate Only ON
  • XY Separation 75%
• Arachne perimeter generator

This is not my model; original author is mentioned in the remix page (all credits go to him!). Anyway, I uploaded it here because I have tried many printer settings and slicing options until I have found mentioned settings above which works great - support parts can be removed really easily and the whole protector is quite durable.