3 Colors 50 Cent Hueforge 

This is my first hueforge design please have mercy on me..

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Gray
    At layer #14 (1.2mm) swap to Jade White for the rest.