A little mixed project i made up for the missus who needed somewhere to put all her knitting nick knacks

the handle isnt uploaded as it needs work but you can design your own if needed

The buttons glue onto the stems first then onto the draws when dry

The magnets strips glues anywhere on the rear of the module. 6mm x3mm magnets can be found on amazon.

Push one magnet into the strip recess cup then stick the other magnet to it. Then glue it to the back of the drawer module and pop a dab of contact adhesive onto outer magnet then slide the drawer in so it makes contact with the contact glue on the outer magnet. Leave contact adhesive to cure overnight before removing the drawers.

Materials needed

contact adhesive / super glue / 6mm x 3mm magnets