Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #22 (1.84mm) swap to Orange
At layer #27 (2.24mm) swap to Jade White for the rest.
Comment & Rating (5)