Bambu Lab Filament Dryer Cover With Stand
Copyright Claim
Bambu Lab Filament Dryer Cover With Stand
Boost
32
56
15
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
8 h
2 plates
Open in Bambu Studio
Boost
32
56
15
1
131
119
Released
Description
I created this Bambu Lab simple convection style filament dryer cover with stand, it takes in the cold air from the bottom and cycles the air through to the top eliminating the need for fans and other items. this reduces the chance of fire with using a cardboard box for example. it will fit most filaments and if you need it bigger up size it simply in the slicer. i recommend printing with ABS, PC, Nylon for the heat resistance. no supports needed. leave a like and a make or comment if you like this model and want more items like this thanks.
Printed in ABS+
0.2mm Layer Height
3 wall loops
60mm/s outer wall speed
Comment & Rating (15)
All
Print Profile
0.2mm layer, 3 walls, 15% infill
Very good. I printed it with ASA.
0
Reply
Works really well. Just a note, if you want to print multiple so that you can dry many filaments at the same time, print the second one at 102% scale, 3rd at 104% scale. This way they can be stored by stacking into each other.
1
Reply
Boosted
So happy I can use this to dry filament, I hadn't thought of making something like this before. Thanks!
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Printed both pieces in PC, came out great. No issues with the model or print profile.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
excellent
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld