Deutsch
Ich Empfehle vor jeden Druck das Filament für mindesten 6 Stunden bei 65° zu Trocknen um kleine Blässchen bildung im Druck zu vermeiden die durch feuchtigkeit entstehen.
Das Druck Profiel ist perfekt für Transparentes PETG abgestimmt dazu muss nur das Testmodel gelöscht werden und seine eigene STL eigefügt werden.
Das Model eignet sich super für ein Farbtest mit verschiedenen schichten von 0,2mm - 1mm dicke um die Transparents zu sehen.
Es eignet sich auch für Normales PETG da es mit nur einer oder zwei schichten nicht vollkommen licht undurchlässig wird.
Ebendso ist ein kleiner Test dabei um zu sehen ob die Lochdiminsion passen.
---------------------------------------------
Englisch
I recommend drying the filament for at least 6 hours at 65° before each print to avoid small bubbles forming in the print that are caused by moisture.
The printing profile is perfectly tailored to transparent PETG. All you have to do is delete the test model and add your own STL.
The model is great for a color test with different layers of 0.2mm - 1mm thick to see the transparents.
It is also suitable for normal PETG as it does not become completely opaque to light with just one or two layers.
There is also a small test to see whether the hole dimensions are correct.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.