MB Engineering Lab

cover

Egg_Cup_3ead4b59-dcbb-464d-9755-89955129cdd9.png

plate_1.png

EggCupActual_29bceeff-b090-4720-8a7b-7f01158c8ab5.webp

EggCup_5a9f57ae-213e-48ba-b40f-10c4b18a4d65.webp

plate_1.webp

<p>The model was designed with 0.16mm layer height and 0.42mm line width in mind, so the built-in 0.16mm Optimal @BBL X1C profile would work well. However Top and Bottom fill patterns were updated to concentric to improve surface finish, increase speed and reduce vibrations. Solid infill pattern was left monotonic for better bridging of the middle section. While overhands were designed to print well with 0.42 line width, increasing this to 0.64mm or even 0.84mm could speed up the print and provide further improvement of outer surface finish.</p>

0.16mm layer, 2 walls, 15% infill, concentric infill for top and bottom layers

<p>Surprise your family with a set of egg cups of your own creation for the Easter morning! Made to be easily printable with no supports. Should be doable overnight (ca. 37 per cup), while everybody is sleeping unless you have a very large family, of course :).</p>

Easter Egg Cup

ASIA

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models