Dispenser for Lickable Cat Treats by olerym

olerym

Household>Pets

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

49 min

1 plate

1.5(2)

Open in Bambu Studio

Boost

Released

Description

This is a print-in-place dispenser for lickable treats for cats. It reduces the messines of using such treats and allows to retrieve every last drop from the tube.

An improved version with better tolerances and extra features is available at https://makerworld.com/en/models/474140.

cat

treat

dispenser

Comment & Rating (8)

@wsantos

Print Profile

0.2mm layer, 2 walls, 15% infill

It doesn't work it's all fused.

The designer has replied

@olerym

Thanks for the feedback! I'll look into loosening the tolerances. I had no issues on my relatively new P1S, but it's probably toop tight for some machines.

@wsantos

Replying to @olerym :

Let me know when you have it, because I think this is perfect, just need to get it working I've used my A1 for this and BL PLA Filament

@olerym

Replying to @wsantos :

I have added the link to the improved version to the description. Could you please try that one and let me know if it works for you?

(Edited)

@user_2992344739

Print Profile

0.2mm layer, 2 walls, 15% infill

Strength Issue:Print broke several places before beign able to 'bend' it as its supposed to.

The designer has replied

@olerym

Thanks for the feedback! Was the print breaking when bending the hinge?

@user_2992344739

Replying to @olerym :

I only attempted a single print, and it might be due to some settings on my X1C, i couldent get any of the 'movable' parts to move, and it proke before bending, i will reattempt another print in Petg and see if that solves the issue.

@olerym

Replying to @user_2992344739 :

Please do let me know. The sliding bit requires a good amount of force to move, twisting it a bit helps. The hinge was very easy for me to mobilize, perphaps it really depends on the settings or the type of filament. If it doesn't work, I would be happy to look into adjusting the tolerances.

No more