Space Shuttle_Stand

Stand for the Space Shuttle 1:200 by Kmobrain with the option to add lighting

https://makerworld.com/en/models/956260-space-shuttle#profileId-925247

Many thanks to: https://makerworld.com/en/@q6614093 

First print the test + adapter then check if it fits If it does not fit scale the test plate + smoke appropriately in the slicer Then attach the adapters to the smoke apply glue to the thrusters and attach them

The 30mm box is sufficient for 2 tea lights or other small lights
The 55mm box is for larger light sources
A cable outlet is present on both boxes
The bottom of the boxes has 2 recesses for tea lights with a diameter of 40mm but is to be printed separately to allow for adjustments and modifications

                                                                                              This image is with the 30mm high box

I have a small hole in my smoke which is visible on the left side in the lower area after slicing but is not optically disturbing With a layer height of 0.2 and 3 wall lines it seems to be closed I did not choose this option to ensure transparency especially for smaller light sources

More useful models can be found here:

https://makerworld.com/en/@YmeY/upload