This is a simple button box I made for a friend.
It is designed after the cheap buttons from aliexpress, has a hole the Arduino's USB C to stick out. I recommend hot gluing the Arduino in place. it a top plate that is meant to be dis assembled to get access to the inside and the two mounting holes.
The two holes on the back are 8mm in diameter, and fit most alu. rigs, if the hole is too big then just use spacers.
What you will receive
If you don't know how to wire the buttons then follow AMstudio's video on youtube, there it is clearly explained.
Remember to download the joystick library for the Arduino IDE.
Part list for the button box
< Optional >
- cheap vinyl (Aliexpress) or use fuzzy skin
If you have any issue feel free to contact me.