Andy’s Design

cover

IMG_4979.JPG

IMG_4982.JPG

Udklip.JPG

plate_1.png

plate_2.png

plate_3.png

64ad6f69ecc7837e.jpg

Support only needed on plate 2 ( The Lid )

Used in Photo's

Container

Plate & Bolt

Lid PETG support

Lid with PLA support interface

plate_4.png

Lid with Support for PLA-PETG support interface

plate_5.png

Codyk

IMG_5659.jpeg

Uses PETG for better UV and temperature resistance, and improves the support on the lid. There are three different plates with the lid, all with different support options. One uses PETG for the support and interface material (no AMS needed). The other two need an AMS because they use different materials for the support interface material, which makes removal of support easier and gives a nicer finish on the bottom side of the lid. The two options are PLA, which doesn&#39;t stick well to PETG and therefore acts as a good support interface, and the other is Bambu Lab&#39;s dedicated support material: Support for PLA/PETG. In addition to these changes I also increased the layer height to 0.28mm for faster print times, and switched to Gyroid infill.

PETG - 0.28mm layer, 3 walls, 15% infill

Owen 3D Prints

Screenshot 2026-03-30 111748.png

I managed to decrease the amount of filament from 423 grams to 314 grams without losing too much strength or durability. Also, it greatly reduces print time.

25% Less Filament

VariDisc - 3mm

VariDisc - 4mm

VariDisc - 5mm

VariDisc - 6mm

VariDisc - 7mm

VariDisc - 8mm

plate_6.png

PerfDisc - Small

plate_7.png

PerfDisc - Medium

plate_8.png

FlyingSquirrel

VariDisc and PerfDiscs.jpg

8 different sizes/styles of dispensing discs

Otomar

Snímek obrazovky 2026-02-12 201659.png

Snímek obrazovky 2026-02-11 171148.png

MODIFIED PLATE_0.2mm layer, 3 walls, 15% infill

Zerograv

PXL_20260522_092230200~3.jpg

Added a 0,6mm nozzle print profile with a bit less material usage then the original 0,4mm nozzle profile.

0.6mm nozzle, 0.3mm layer, 2 walls, 13% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h3>AllSeason Hand Spreader</h3><boostme><boosttitle>Boost Me</boosttitle></boostme>Description: A versatile handheld spreader designed for year-round use. Perfect for spreading grass seed and fertilizer during the growing season, and salt for ice and snow in winter.The ergonomic handle gives a comfortable grip, while the controlled outlet helps ensure an even spread with minimal waste. Easy to fill, easy to use, and great for lawns, paths, and driveways.&nbsp;I have printed the spreader in PLA-CF.&nbsp;Print info: • Used filament: 424 g • Total print time: ~10 hours&nbsp;Simple, practical, and made to last.&nbsp;

AllSeason Hand Spreader

ASIA

Print Profile(6)

Bill of Materials

Description

AllSeason Hand Spreader

Comment & Rating (945)

License

Related Models