A simple box design to store your guitar picks and keep them together. The box is made to fit a standard sized pick, being 1.1" (27.94mm) by 1.26" (32mm). The lid snaps on to two pegs attached to the box, and it also has a beveled edge to make opening the lid easier. The pegs may need to be cleaned up after printing to get a good fit, depending on your printer and settings.

Printed at:

0.2mm layer height

0.4mm nozzle & 0.44mm line width

3 perimeters & 4 top and bottom layers

100mm/s print speed

Ironing enabled