Liquid Ant Bait Traps for Countertop, Wall, Corner

These are printable ant traps - just supply your own liquid bait (such as Terro).

The countertop trap sits on the counter or any flat surface and has a handy for easy placement.

The wall and corner traps required double-sided tape or sticky tack to stick them to the wall in the path of invading ants.

About this Design

These are designed to place anywhere and hold the liquid bait in place.  You can either reuse these or dispose of them after using.  They are quite light and can be placed anywhere.

I have included four separate profiles, including one that includes one print of each, a version with 9 countertop prints and versions with 3 of each of the wall print and corner print.

Printing Material

This prints perfectly in PLA.  I have not tried any other materials, but PLA should be sufficient.

Use

You can fill the traps either before or after placing in the desired location.  Simply put a few drops of liquid in the center (about 5-6 drops of Terro from my testing) and put in place.  For the wall and corner models, apply the sticky tack or double-sided tape first, then put a few drops of bait in the well and then press in place at the desired location.

Removal

The countertop version can be adjusted and moved using the handle.  The wall and corner versions have sturdier tabs you can pull to remove from the wall.