FOR FREEDOM ANDS DEMOCRACY!! Two in one print, Both have the same settings below.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.6mm) swap to Red
At layer #11 (1mm) swap to Pure Yellow
At layer #15 (1.32mm) swap to White for the rest.