Deutsch
Ich Empfehle vor jeden Druck das Filament für mindesten 6 Stunden bei 55° zu Trocknen um kleine Blässchen bildung im Druck zu vermeiden die durch feuchtigkeit entstehen.
Die Druck Profiele sind perfekt für TPU abgestimmt es gibt eins für Transparentes TPU und eins für Normales TPU dazu muss nur das Testmodel gelöscht werden und seine eigene STL eigefügt werden.
Das Model eignet sich super für ein Farbtest mit verschiedenen schichten von 0,2mm - 1mm dicke um die Transparents zu sehen.
Ebendso ist ein kleiner Test dabei um zu sehen ob die Lochdiminsion passen.
---------------------------------------------
Englisch
I recommend drying the filament for at least 6 hours at 55° before each print to avoid small bubbles in the print caused by moisture.
The printing profiles are perfectly tailored for TPU - there is one for transparent TPU and one for normal TPU. All you have to do is delete the test model and add your own STL.
The model is great for a color test with different layers of 0.2mm - 1mm thick to see the transparents.
There is also a small test to see whether the hole dimensions are correct.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.