Ink Batman hueforge
*created with filament painting technique using hueforge software.
Remember if you want to scale, do it only with x and y axis, z must be the same as original.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Blue Gray
PLA BambuLab Basic Beige
PLA BambuLab Basic Jade White
Swap Instructions: if you don't have ams just put pause on specified layers and swap filamen manually
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Beige
At layer #21 (1.76mm) swap to Jade White for the rest.