M9 Rubber Band Gun by Lucky Dragon

Lucky Dragon

Toys & Games>Other Toys & Games

GIF

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

5.1 h

3 plates

4.8(83)

Open in Bambu Studio

Boost

596

1012

137

2.2 k

988

Released

Description

AK47 Rubber Band Gun V1.0 Release Model Download Url：

https://makerworld.com/zh/models/784224#profileId-721706

Description:

1. This is a 3D printed model designed and produced based on the blueprint of the M9 wooden board rubber band gun from a foreign expert.

Features:

1. 3D modeling was performed on the original wooden board drawings.

2. We have merged some duplicate components (the original one had over 40 parts, printing them separately was very time-consuming and assembly was also troublesome). Now, with the addition of new gasket parts, there are less than 20 parts, and necessary components have been drilled to avoid secondary drilling during assembly.

3. Added M9 firearm text content, making the model more realistic.

4. Shorter printing time.

5. The original 4mm hole position has been changed to 2.5mm, making it convenient to assemble directly with 1.75mm consumable wire (or M3 screws can also be used for assembly).

Printing:

1. Turn on support printing.

2. PLA material can be printed in motion mode, please use normal printing speed for PETG.

Security:

1. Although rubber bands are not harmful to the human body under normal circumstances, please adhere to a principle: at no time should the muzzle of the gun be aimed at humans or animals.

material

1. 3D model adhesive.

2. 1.75mm consumable wires. (or M3 * 10 screws).

3. Several 4CM rubber bands.

Assembly:

You can refer to the original drawing author's wooden version assembly video for assembly, and use glue to bond the parts together. In the model document, the original drawings are provided, and you can also use the drawings to make a wooden version of the rubber band gun.

Documentation (1)

Assembly Guide (1)

M9 rubber band gun_4204591b-6f62-4221-aa6e-a4047eab7d26.pdf

Comment & Rating (137)

@ZakoJaz

thank you

@user_2885977772

whats in the back tho?

@ZakoJaz

Replying to @user_2885977772 :

my collection of 3d printed foam dart blaster

@user_2885977772

Replying to @ZakoJaz :

so u have a whole armory of dart blasters but still make a small rubber gun?

@LyndenP

Boosted

Excellent model prints well. I beveled off the upper front corner of the ammo clip so that it now slides into the gun without the need to operate the retaining mechanism. Thanks for all the effort that went into this!

@user_3508694054

what model is the stand in the pic?

@GeorgeLikesJam

it’s a magazine not a clip a clip is pulled through the gun by the gun a magazine puts the amo into the gun and then comes out of the gun when the holder clicks or twists something

@LyndenP

Boosted

Replying to @user_3508694054 :

Stand for M9 Rubber Band Gun https://makerworld.com/en/models/884733#profileId-839591

@oneillam

The print profile is no longer public

assembly is very involved but the model works. the holes need to be drilled out to accommodate 1.75 filament. I skipped all the screws and just used glue instead, worked well.

@wolverineprinti

so, you super glued filament in where all bolts are supposed to be? I can not find the correct size/length bolts for this... please help?

@oneillam

Replying to @wolverineprinti :

right, I used no hardware, just glue and filament

@max_gresham

The print profile is no longer public

I have only printed the first plate on A1 Mini but it is very highly recommended so far…

@Potatobakerman

Good quality print, I reccommend making your own 2mm wide rods and using superglue since it is hard to find fitting screws.

@user_1399012648

Print Profile

0.2mm layer, 2 walls, 10% infill

very high quality print

@NeilHeslop

Print Profile

0.2mm layer, 2 walls, 10% infill

Easy print and easy to assemble with a little glue and excess filament. Great idea

@wolverineprinti

Print Profile

0.2mm layer, 2 walls, 10% infill

I had no issues for printing. assembly went well once I found the correct size/length bolts. Functions well. Thank you for sharing.

@user_3540364823

A truly cool pistol The only issue is that screws are used, making the trigger quite stiff I have already tried to incorporate 3 rubber bands inside, yet the trigger still does not fully reset Perhaps some oil will help, or it might become smoother with time and wear Nevertheless, I am thrilled 😃

Show original

@user_2685687390

Print Profile

0.2mm layer, 2 walls, 10% infill

Excellent

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.