Designed and converted to 3d with hueforge

instructions as below

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Fossil Grey Transmission Distance: 0.3
PLA PolyTerra Cotton White Transmission Distance: 2.5
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Fossil Grey
At layer #12 (1.04mm) swap to Cotton White
At layer #18 (1.52mm) swap to Cotton White for the rest.