Remix of the chip cliv V3 by @dav88 to add a hole for a 2x6mm magnet! Its just a tad larger than the original to support the magnet.

I designed the hole with a 0.2mm tolerance and was able to pressure fit the magnet in the hole without gluing, if you have better tolerances than I you may need to use a small dab of superglue.

Print Settings

Printer Brand:

LulzBot

Printer:

Rafts:

No

Supports:

Resolution:

0.25

Infill:

Notes:

Pretty much any settings will do, no supports.