Godzilla Hueforge - Free 3D Print Model

Search models, users, collections, and posts

the_bearded_jedi

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

H2C

H2D Pro

H2S

H2D

X1 Carbon

X1E

P1P

P2S

X2D

A2L

0.04mm layer, 2 walls, 100% infill

Designer

4.6 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Project: Godzilla.hfp

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.36mm

    #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
    #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    #41273b PLA Paramount 3D Decepticon Purple Transmission Distance: 1.8
    #da4087 PLA Bambu Pink Transmission Distance: 3.2
    #781f1c PLA Paramount 3D Iron Red Transmission Distance: 3
    #de1619 PLA PolyTerra Lava Red Transmission Distance: 1
    #f78e0e PLA PolyTerra Sunrise Orange Transmission Distance: 2.5
    #e6dede PLA Overture Matte White Transmission Distance: 3.7
This print uses 8 unique filaments

Swap Instructions:
    Start with Blue Gray
    At layer #16 (0.76mm) swap to Charcoal
    At layer #18 (0.84mm) swap to Decepticon Purple
    At layer #19 (0.88mm) swap to Pink
    At layer #20 (0.92mm) swap to Iron Red
    At layer #22 (1mm) swap to Lava Red
    At layer #25 (1.12mm) swap to Sunrise Orange
    At layer #28 (1.24mm) swap to White for the rest.

godzilla

hueforge