Tokyo ghoul - hueforge - Free 3D Print Model

Search models, users, collections, and posts

Altf4-Formation

Art>2D Art

IP Report

GIF

Print Profile(1)

All

P1S

P1P

H2D

H2D Pro

H2S

H2C

P2S

X1E

X1 Carbon

X2D

A2L

0.04mm layer, 1 walls, 100% infill

Designer

7.7 h

1 plate

Open in Bambu Studio

Boost

Released

Bill of Materials

Bambu Filaments

Select all

Description

My photos are indeed those of the printed model and not of the original image

-------------------------------------------------------------------------------------------------------------------------------------------------------

Commercial license and exclusive models on Ko-fi!

Thanks!

-------------------------------------------------------------------------------------------------------------------------------------------------------

Hueforge of Tokyo Ghoul by azizkeybackspace
The photos shows the result in 141.44x200mm and a nozzle of 0.4

Boost Me (for free)

Thanks for your boost and your support!

You can change the X and Y dimensions but do not change the Z dimensions
You must define the printing parameters indicated in the description below and change the filament at the specified heights.
You can use filaments other than those indicated, but the result will differ.
You can use any black PLA

Hueforge description

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 141.44x200mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 3.36mm and the Actual Thickness is 2.44mm

    #000000 PLA BambuLab Basic Black Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
    #c00d1e PLA BambuLab Basic Red Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
    #547bcb PLA BambuLab Basic Purple Transmission Distance: 1.6
    #9d432c PLA BambuLab Basic Brown Transmission Distance: 2
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #17 (0.84mm) swap to Blue Gray
    At layer #25 (1.16mm) swap to Red
    At layer #35 (1.56mm) swap to Jade White
    At layer #36 (1.6mm) swap to Purple
    At layer #38 (1.68mm) swap to Jade White
    At layer #40 (1.76mm) swap to Brown
    At layer #45 (1.96mm) swap to Jade White for the rest.

-------------------------------------------------------------------------------------------------------------------------------------------------------

Don't forget your grandma's advice: Always have a clean plate, a dry and calibrate filament, and make an offering to the god of 3D printing from time to time.

tokyo ghoul

HUEFORGE

rizekamishiro

Comment & Rating (1)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.