Silenced Magnetic Poop Shoot / Purge Bucket for X1C/P1S
Copyright Claim
Silenced Magnetic Poop Shoot / Purge Bucket for X1C/P1S
Boost
59
131
41
Print Profile(1)
0.24mm layer, 2 walls, 20% infill
Designer
2.8 h
1 plate
Boost
59
131
41
4
337
200
Released
Description
I was thinking of a version of the Purge Bucket that is closed to block any noise from the inside.
The holes are for 10x3mm magnets, I just glued them in with a hot glue gun.
I also glued in some fleece.
Amazon DE Link:
https://www.amazon.de/dp/B086JPK3GH?psc=1&ref=ppx_yo2ov_dt_b_product_details
------------------------------------
Printing
I printed it standing up with few supports (see pictures).
Prusament Galaxy Black PLA
0.24 Layer Height
Time: 2h53min
Comment & Rating (41)
All
Pretty cool. I had a really hard time getting the magnet and label supports off though. P1S, Black PLA Matte.
1
Reply
Print Profile
0.24mm layer, 2 walls, 20% infill
1
Reply
Boosted
Print Profile
0.24mm layer, 2 walls, 20% infill
incredible! I bought magnets from Amazon that fit perfectly when glue gunned. print quality was good, fit was perfect. no complaints!!
2
Reply
Print Profile
0.24mm layer, 2 walls, 20% infill
very good Part!
only Problem ist that the poop shoot doesnt fit bewlow the Filament on the Backside.
Filament Roll should be positioned elsewhere.
The designer has replied
1
Reply
Thanks! Yes, I have mine on the side of the printer
0
Reply
Print Profile
0.24mm layer, 2 walls, 20% infill
Ist ne super Sache top !
The designer has replied
1
Reply
Freut mich, danke für den Kommentar!
(Edited)1
Reply
Print Profile
0.24mm layer, 2 walls, 20% infill
Makes my printer sooooooo much quieter!
1
Reply
Print Profile
0.24mm layer, 2 walls, 20% infill
good print
1
Reply
Print Profile
0.24mm layer, 2 walls, 20% infill
Printed without issue.
1
Reply
Can someone share a link to appropriate magnets on Amazon?
The designer has replied
0
Reply
I used these https://www.amazon.de/gp/product/B07XRB2MM3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
1
Reply
Print Profile
0.24mm layer, 2 walls, 20% infill
tip of the day, make sure the superglue is fully dry before placing magnets against the back of the printer
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld