If you use the vinyl cutter, you will need to replace the stock fan mount with the 3D printed one. I printed it with PLA, and it's doing fine but if you can, print it with ABS, It should last longer.
My hot-end broke, so I replaced the stock hot-end with this one: https://s.click.aliexpress.com/e/_Dn5qBGJ
Update: this hot end is way better than the stock, it extrudes filament like butter i really recommend making this upgrade
The vinyl cutter I use is this one: https://s.click.aliexpress.com/e/_Dlbjtrz
But any similar cutter should work on the mount.
You need to remove the cutter blade before 3D printing otherwise you will cut the bed