Monkey Skull II
Print Profile(1)
Description
The skull of a monkey, x-rayed and made of smoke.
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA BambuLab Matte Charcoal (I've used Dark Blue) Transmission Distance: 0.8
PLA SPARKLE BambuLab Slate Gray Sparkle Transmission Distance: 10
PLA BambuLab Matte Ash Gray Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal (I've used Dark Blue)
At layer #3 (0.72mm) swap to Slate Gray Sparkle
At layer #5 (1.12mm) swap to Ash Gray
At layer #8 (1.72mm) swap to Ivory White for the rest.
Happy printing, and share your make!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)